2 Analog In & 1 Analog Out
FD300 board is no more manufactured and supported. For working with analog signals, FD322 board should be used instead.
The FD300 board is a hardware framework for all the Forward T product line. In addition to the video input/output device (two input channels and one output channel), the board provides three audio input/output stereo channels. It is possible to install several boards in the same computer to build multichannel solutions.
The Fd300 board specification
|Video format||PAL, SECAM: 720×576, 25 fps|
NTSC: 720×480, 29.97 fps
|Internal video data processing||YUV 4:2:2 or YUV with transparency 4:2:2:4, 8-bit per component|
|Video inputs||Two independent video channels with connection:|
– up to 12 composite sources
– up to 6 S-Video sources
– up to 3 component sources (YUV, YUVS, RGB, RGBS)
Two channels of time-base correction (TBC)
|Video outputs||Possible combinations:|
– Y/C + CVBS
– YUV + CVBS
– YUV + Key/transparency channel
|Synchronization||Video output genlock to one of the video inputs|
|Audio||Inputs: 6 mono or 3 stereo|
Outputs: 6 mono or 3 stereo
Format: uncompressed (PCM), 16 bit, from 8 to 48 KHz
Microphone amplifier for 2 stereo channels
Configurable audio delay (independent for each input channel)
Routing any input channel to any output channel with an adjustable volume
Synchronizing audio to the video signal
Balance XLR connectors (optionally)
FDEXT BOARDS FOR OPERATION WITH OTHER TYPES OF SIGNALS:
– FD322 – 2 ANALOG IN, 2 ANALOG OUT;
– FD788 – SDI: SD/HD/3G/UltraHD; ASI. 8 configurable IN/OUT;
– FD722 – SDI: SD/HD/3G; ASI. 2 IN & 2 OUT;
– FD922 – SDI: SD/HD/3G/UltraHD/12G; ASI. 2 IN & 2 OUT;
– FD720 – HDMI. 2 IN;
– FD940 – HDMI. 4 IN.
The board is out of production. It can be exchanged for other boards at a discounted price.
If you have any questions, please contact the Sales department of SoftLab-NSK.